Description
- Noise Reduction Effect: The amplifier has a wide operating frequency range and low noise figure. At the same time, it is shielded by a metal shell and has a noise reduction effect.
- Stable Gain: The gain of this amplifier is high, which can provide the communication effect between the receiver and the transmitter, and the gain is stable. The supply voltage can be reduced or customized when different gain values are required.
- Wide Applicability: This broadband low noise amplifier is used for RF amplification that requires low noise, such as shortwave, FM broadcast, remote control receiver, cable TV amplifier, etc.
- Dynamic Range: The noise figure of this amplifier is 2dB (measured at 1.5GHz), the noise is smaller, and the dynamic range is larger. It is especially suitable for various RF receiving front-end circuits to increase the communication distance.
- Practicality: The amplifier's receiving RF front-end and other places where low-noise small- RF amplification is required, due to its low performance, it can be perfectly matched with various circuits. The product is thin and practical.
Specification:
Item Type: RF Wideband Low Noise Amplifier LNA
Technical Indicators:
1. Power Supply Voltage: 12V DC (typical current value 75MA)
2. Gain: 19.5DB input and output impedance: 50 ohms
3. Maximum Output Power: 19.5dBm (under 6VPP\50 ohm load)
4. Input : <=0DBM (the output is already distorted when input is greater than 0dBm)
5. Bandwidth: 1MHz to 3GHz (gain is different at different frequencies, please refer to S21 curve index for details)
6. Noise Figure: 2dB (measured at 1.5GHz)
7. With metal shell
8. Others: When different gain values are needed, the power supply voltage can be reduced or customized.
9. Point Frequency Method Gain:
F=15.2MHZ GAIN=17.99DB
F=345.2MHZ GAIN=19.55DB
F=945.2MHZ GAIN=18.09DB
F=1.500GHZ GAIN=16.16DB
F=1.955GHZ GAIN=15.77DB
F=2.295 GHZ GAIN=14.11DB
F=2.610 GHZ GAIN=13.60DB
F=2.895MHZ GAIN=12.56DB
Package List:
1 x Amplifier LNA (1-3000MHz gain: 20dB)