Description
- Motor Drives
- 60ST-M01930 600W 220V AC Servo Motor 1.91N 3000rpm Single-Phase permanent magnet Matched driver A1-SVD15 with RS-232 /RS-485
Motor Drives
220V4W AC Permanent Magnet Motor 49KTYZ Micro Low Speed Gear Motor Small Volume And Low Noise For Electric Fan
specification
Product name:AC motors
Model:49KTYZ
Power:4W
Motor size:49*21mm
size:7*15.5mm
Weight:110g
Voltage:AC 220V
Rotating speed:3-35RPM
Not Adjustable speed / Not CW CCW
Scope of application
49KTYZ AC motors are mainly used in handicrafts and paintings, automated instruments, electric fans, heaters, air conditioners, microwave ovens, rotating lamps, curtain machines, rotating antennas, stage lighting, optical fiber lights, optical fiber flowers, stage lights, seascape lights Among other craft gifts, fortune fans, electric fans shaking their heads, quartz heaters, ice cream dispensers, rotating TV antennas, rotating lamps, stage lighting, electric dining tables, electric models, electric advertising pictures, electric shelves, automatic turntables, dishwashers, science and education Instruments, and automation instruments, etc.
Precautions for the use of the motor
1. Before use, confirm whether the motor voltage is correct, and if it is a DC motor, also confirm whether the power supply current is sufficient.
2. It cannot be overloaded. The reasons for overloading are mainly divided into two parts: and the force of the shaft. The load should not exceed the rated of the motor, and the force of the shaft should not exceed the allowable axial and radial force of the shaft. After the load is applied, the measured current of the motor cannot exceed the rated current. Generally, the motor must be equipped with a fuse to avoid overloading the motor.
3. Do not store or operate in a high temperature or humid environment, and do not place it in corrosive gas, which will reduce the performance of the motor.
4. When assembling transmission parts such as gears and pulleys on the motor shaft, do not knock abnormally when pressing in.
5. When soldering is required on the motor t