Description
- Use this adapter to make your installation of a 4 channel amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides 2 pair stereo RCA output. Adjustable 4 channel gain output. Retains fader and balance. Connection is done at back of radio. Bare speaker wires on this adapter to connect factory speakers to the new amp. Ignition wire connection for amp turn on wire connection.
- VERY IMPORTANT----PLEASE READ BEFORE PURCHASE---- Not compatible with factory amplified stereo systems. Only works with factory non-amplified systems (no Bose, Infinity, JBL/Synthesis, etc.) Connecting this adapter to the factory wiring will disconnect the vehicle speakers from the radio- required adding amp for speakers to work. Quick disconnect is to connect speaker wires to run to the new amp- only the speaker wires are connected to the factory speakers- all other wires aren't used.
- Easy to put back to stock. Just remove this adapter and it goes back to stock system. Adapter shrink tubed for durability.
- Compatible vehicles: No externat factory amp vehicles: Made for Nissan: 2010-2020 370Z, 2007-2020 Altima, 2008-2015 Armada, 2009-2014 Cube, 2009-2011 Frontier, 2012 Frontier (S trim/base model only), 2013-2021 Frontier, 2011-2017 Juke, 2018-2021 Kicks, 2012-2019 Leaf, 2007-2020 Maxima, 2009-2019 Murano, 2012-2021 NV, 2013-2021 NV200, 2008-2012 Pathfinder (No S model), 2013-2020 Pathfinder, 2011-2016 Quest, 2008-2020 Rogue/Rogue Select/Rogue Sport, 2007-2021 Sentra,
- 2008-2012 Titan (S trim/base model only), 2013-2021 Titan, 2016-2021 Titan XD, 2007-2022 Versa, 2014-2019 Versa Note, 2014-2015 Xterra;; Made for Subaru: 2009-2015 Forester without OE Nav, 2008-2014 Impreza/WRX without OE Nav, 2010-2011 Legacy without OE Nav, 2010-2011 Outback without OE Nav, 2013-2014 XV Crosstek without OE Nav;; Made for Suzuki: Equator 2009-2011- crew cab only
Use this adapter to make your installation of a 4 channel amplifier to the factory system faster with a cleaner install. Adjustable 4 channel gain output. Retains fader and balance. Connection is done at back of radio. Quick disconnect bare wire connector to connect factory speakers to the new amp- won't require looking for or cutting of factory speaker wires. The speaker wire is already cut on this adapter so you can connect speaker wires to it to run to the new amp- once this adapter is connected the factory speakers will need to be connected to an aftermarket amplifier for the system to work. Easy to put back to stock. Compatibility Notes: Not compatible with factory amplified stereo systems. Only works with factory non-amplified systems (No Bose, Monsoon, etc.). Quick disconnect is to connect speaker wires to run to the new amp- only the speaker wires are connected to the factory speakers- all other wires aren't used. Ignition wire connection for amp turn on wire. Connecting this adapter to the factory wiring will disconnect the vehicle speakers from the radio- required adding amp for speakers to work. Compatible vehicles: No externat factory amp vehicles: Made for Nissan: 2010-2020 370Z, 2007-2020 Altima, 2008-2015 Armada, 2009-2014 Cube, 2009-2011 Frontier, 2012 Frontier (S trim/base model only), 2013-2021 Frontier, 2011-2017 Juke, 2018-2021 Kicks, 2012-2019 Leaf, 2007-2020 Maxima, 2009-2019 Murano, 2012-2021 NV, 2013-2021 NV200, 2008-2012 Pathfinder (No S model), 2013-2020 Pathfinder, 2011-2016 Quest, 2008-2020 Rogue/Rogue Select/Rogue Sport, 2007-2021 Sentra, 2008-2012 Titan (S trim/base model only), 2013-2021 Titan, 2016-2021 Titan XD, 2007-2022 Versa, 2014-2019 Versa Note, 2014-2015 Xterra;; Made for Subaru: 2009-2015 Forester without OE Nav, 2008-2014 Impreza/WRX without OE Nav, 2010-2011 Legacy without OE Nav, 2010-2011 Outback without OE Nav, 2013-2014 XV Crosstek without OE Nav;; Made for Suzuki: Equator 2009-2011- crew cab only