Description
- Package Includes: (2) MTX S6512-44 12" 1000w Peak/500w RMS Square Subwoofer Car Audio Sub DVC 4-ohm. (1) Polk Audio PAD1000.1 Mono 1200 Watt RMS 1-Ohm Car Audio Amplifier Amp PA D1000.1. (1) Rockville RWK21 2 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA. Features: MTX S6512-44 12" 1000 Watt Peak/500 Watt RMS Square 4-Ohm Car Subwoofer. RMS Power Handling: 500 Watts. Peak Power Handling: 1000 Watts. Recommended Amp Power: 250-500 Watts RMS. Impedance: Dual 4-Ohms
- Frequency Response: 23Hz - 130Hz. Sensitivity: 86.7 dB. Volume Displacement: 68.47 cu in. Voice Coil: 2" inches. Mounting Depth: 6.94" inches. Cut Out Diameter: 9.13" inches. Patented Surround Geometry: Surround Allows for Increased Xmax Resulting In Higher SPL and Volume Displacement. Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality. Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
- Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality. Product Dimensions: 11.63" x 34" x 12.25" inches. Product Weight: 31 Lbs.. Features: Polk Audio PAD1000.1 Mono 1200 Watt RMS 1-Ohm Car Audio Amplifier Amp PA D1000.1. Super-Efficient Class D Design - Runs much cooler than conventional amps.. High-Speed MOSFET Switching - Power supply with outputs stable into 1 Ohm loads.. Protection - Thermal, DC offset, reverse polarity and short circuit protection.
- Variable Low-Pass Filter: 40 Hz - 220 Hz.. Variable Subsonic Filter: 20 Hz - 38 Hz.. Bass Boost at 0 dB - 12 dB.. Bass Boost at 44 Hz.. Remote Subwoofer Level Control.. Nickel-Plated Wire Terminals & RCA connectors - Ensure maximum signal transfer.. Level Control - Adjusts the gain of the channel to match the output voltage from your head unit.. Line Level Outputs - Provides a full range signal for easy connection to additional amplifiers.
- Stainless Steel Hardware - Used throughout won't corrode in humid environments.. Specifications: Type: Class D MOSFET. Channels: monoblock. RMS Continuous Power @ 4 Ohms: 500 W x 1. RMS Continuous Power @ 2 Ohms: 800 W x 1. RMS Continuous Power @ 1 Ohm: 1200 W. Distortion at Rated Power: 150
Crossover Filter Slope (dB/octave): 12 dB/octave. Sub Sonic Filter Frequency Range: 20 Hz - 38 Hz. Low Pass Filter Frequency Range: 40 Hz - 220 Hz. Bass Boost Frequency: 44 Hz. Bass Boost (dB) Variable (0 dB - 12 dB). Line Level Inputs. Line Level Outputs. LED Power Indicator. LED Protection Indicator. Input Sensitivity: 200 mV - 6 V. Supply Voltage: 10 V - 16 V. Fusing & Power/Type: (3) 40 Amp ATC. Power Connections: 4 AWG. Ground Connections: 4 AWG. Speaker Connections: 12 AWG. Height: 1 13/16" (46 mm). Depth: 6 3/4" (171.5 mm). Width: 12 15/16" (328.6 mm). Width w/ Terminal Adaptor: 13 11/16" (347.7 mm). Weight: 6 1/2 lbs (2.95 kg). Features: Rockville RWK21 2 Gauge Car Amplifier Wiring Installation Kit. (1) 17' High Grade Twisted Pair of 100% Copper RCA Cable. 17' 2 Gauge Translucent Blue SuperFlex Power Cables. 17' 18 Gauge Blue Remote Cable. 17' 16 Gauge Clear Speaker Wire. 3' 2 Gauge Clear SuperFlex Ground Wire. Gold Plated ANL Heat Resistant Fuse Holder. 150 Amp ANL Gold Plated Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F Built for SPL.