Description
- JST PH2.0 2-Pin interface, cable length 40cm (15.75 inches)
- Power: Rated Power / Maximum Power 3.0W / 3.5W
- Impedance: 8 Ohms Plus/Minus 15%
- Size: 70 mm * 31 mm * 16 mm / 3.1 inch * 1.2 inch * 0.63 inch (L* W * T)
- 2 Pcs/1 Pair JST-PH2.0 interface 8 ohm 3 watt passive miniature loudspeaker encapsulation.
CQRobot has carefully configured this passive miniature loudspeaker for makers and electronics enthusiasts, Compared with the previous generation (ASIN: B0738NLFTG), the volume level has been greatly improved. This miniature loudspeaker uses JST PH2.0 interface, resistance 8 ohms, power 3 watts, long strip size, with mounting screw holes, suitable for all kinds of small DIY electronic projects, the sound is clear and pleasant without distortion.
Note: For technical support, please refer to CQRobot Wiki to get the test code, SKU: CQRLS-A.
SPECIFICATIONS
- Impedance: 8 Ohm Plus/Minus 15% at 1000Hz.1V;
- Power Rating: Rated Power / Maximum Power 3.0W / 3.5W;
- FO: 450Hz Plus/Minus 150Hz at 1.0V;
- S.P.L: 94dB Plus/Minus 3dB/1.0 Watt 0.1Meter, Average At1000, 1200, 1500, 2000Hz;
- Frequency Range: FO to 10,000Hz, Average SPL-10dB;
- Distortion: 10% Maximum at 1000Hz.1.0V;
- Abnormal Sound Test: Must be Normal Tested by 4.9, Volts.Sine wave for 50 to 5KHZ;
- Polarity: Diaphragm Shall Move Forward When Apply a Positive DC, Red "+" or "Marked" Terminal;
- Operating Temperature: -25 Degree Celsius to +65 Degree Celsius;
- Storage Temperature: -25 Degree Celsius to +65 Degree Celsius;
- High Temperature Storage Test: 65 Degree Celsius Plus/Minus 2 Degree Celsius - 96 Hours;
- Low Temperature Storage Test: -25 Degree Celsius Plus/Minus 2 Degree Celsius - 96 Hours;
- Size: 70mm * 31mm * 16mm;
- Screw hole distance: 24mm * 63mm;
- Interface cable length: 40cm;
- Total weight: 24g.
SHIPPING LIST
2 * JST-PH2.0 interface 8 ohm 3 watt miniature loudspeaker