Description
- Digital AM/FM Tuner/30 Preset stations (12 AM/18 FM); Bluetooth streaming audio (A2DP) and control(AVRCP)
- Front USB with MP3/WMA playback; Slot type DVD/CD-R/RW and MP3 compatible (does NOT have an HDMI port)
- 2 speaker zones, 4 speaker outputs
- Electronic Bass, Treble, Balance and Fader Controls
- 4 pcs M3x20mm screws are required for installation (not included with the unit) (Customer needs to remove the shipping screws before installation)
Jensen JWM41 AM/FM|DVD|CD|USB|AUX| Bluetooth (A2DP & AVRCP) Wallmount Stereo, 2-Speaker Zone / 4 Speakers, Plays: CD, CD-R, CD-RW, DVD, DVD+RW, DVD-RW, DVD-Video, MPEG-4, VCD, JPEG, CD-DA, MP3, WMA
(Note: Please make sure the customer removes the shipping screws before installation)
Key Features:
- Digital AM/FM Tuner/30 Preset stations (12 AM/18 FM)
- Bluetooth streaming audio (A2DP) and control(AVRCP)
- Front USB with MP3/WMA playback
- Slot type DVD/CD-R/RW and MP3 compatible
- Customer needs to remove the shipping screws before installation
- Skip Protected Disc Mechanism
- 2 speaker zones
- 4 speaker outputs
- Electronic Bass, Treble, Balance and Fader Controls
- Front AUX A/V input (3.5mm), 1 rear audio RCA input/ 1 rear RCA output, 1 RCA compositve video output (does NOT have an HDMI port)
- White LED backlight LCD panel with blue LED buttons
- Clock with alarm and sleep timer
- Wireless Remote Control included
FM Tuner:
- Frequency Coverage (USA): 87.5 to 107.9 MHz
- Sensitivity: <4 v
- Stereo Separation@1 kHz:>25 dB
AM Tuner:
- Frequency Range (USA): 530-1710 kHz
- Sensitivity (S/N=20dB): <63 v
Amplifier:
- Output Power: 6W x 4
- Output Impedance: Compatible with 4-8 ohms speakers, 4 ohm load minimum
DVD:
- Frequency Response: 20-20,000 Hz
- Channel Separation: 50 dB
- S/N Ratio: 65 dB
- Distortion: 0.5%
General:
- Power Supply Requirements: DC 12 Volts, Negative Ground
- Operating Voltage: 11-16 VDC
- Overall Dimensions: 8.23" (W) x 6.56" (D) x 4.37" (H)
- Mounting Dimensions: 7.09" (W) x 5.24" (D) x 3.47" (H)
- Weight: 2.41 pounds
- 4 pcs M3x20mm screws are required for installation (not included with the unit) (Customer needs to remove the shipping screws before installation)