Description
- Package Includes: (1) KICKER 43C154 Comp 15" 500 Watt SVC 4-Ohm Car Audio Subwoofer. (1) RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 Channel Amplifier. (1)RockvilIe RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA. Features: KICKER 43C154 Comp 15" 500 Watt SVC 4-Ohm Car Audio Subwoofer Sub. Size: 15 inches (38.0 cm). Impedance: 4 ohms SVC. Max Rec Amplifier Power:* .500 Watts Peak .250Watts RMS. Recommended power range: 200 - 300 RMS. Thick Polypropylene Woofer Cone
- High density Sun Light Treated surround. 360-degree back bracing. Bumped back plate. High temperature voice coil. Large Magnet. Sensitivity: 90.3 dB 1w/1m. Frequency Response: 25-500 Hz. Mounting Depth: 7 7/16 inches (18.9 cm). Mounting Cutout: 13 11/16 inches (34.7 cm). Min Sealed Box Vol: 2.25 cu. ft (63.7 L). Max Sealed Box Vol: 5.0 cu. ft (141.6 L). Min Vented Box Vol: 3.0 cu. ft (85 L). Max Vented Box Vol: 4.0 cu. ft (113.3 L).
- RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 ChannelCar StereoAmplifier. CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD 1 x 370 Watts bridged @ 4 Ohms < 1% THD. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD
- RMS Power Ratings 750 Watts (2 x 375 Watts RMS) @ 2 ohms 1 x 750 Watts @ 4 ohm Bridged Mono 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz
- High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05%. Frequency Response: 10Hz - 40KHz. Damping Factor: > 200 @ 100Hz. 50 Amp Maxi Fuse
Dimensions: (W x H x L) 8.5" x 1.8" x 13". CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms <1% THD. 1 x 370 Watts bridged @ 4 Ohms <1% THD. RMS Power Ratings. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) <1% THD. Features: RockvilIe RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 8 Gauge Translucent Blue Super Flex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 8 Gauge Super Flex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer. The RXA-T1 is a 2 channel amplifier with 1,500 Watts peak output and 500 Watts RMS (2 x 250 @ 4 Ohms). You can also bridge the amplifier and get 1 x 750 Watts RMS @ 4 Ohms. Here at RockvilIe we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be used to compare with brands who rate their ite