Description
- Timing lights to music is made simple with the seven peak-detected frequency bands multiplexed to the output.
- Compatible microcontrollers - including Raspberry Pi, Arduino, and BeagleBone - provide a quick and easy way to analyze the component frequencies of incoming audio.
- The onboard 3.5mm stereo audio jack allows for easy analysis of audio from a phone, laptop, or other device.
- Pre-soldered connectors allow for easy, out-of-the-box use. The pins use a 0.1" pitch, making them breadboard-friendly.
- Quality control ensures that every board shipped meets our high standards and works as advertised. The board is designed and manufactured in California.
This is an MSGEQ7 spectrum analyzer breakout board. It divides the incoming audio spectrum into seven bands. These seven frequencies are peak detected and multiplexed to the output to provide a DC representation of each band. The operating voltage is 2.7V to 5.0V.
The MSGEQ7 can be used to analyze audio fed in through the stereo jack on the board. The data can be sent to an Arduino, Raspberry Pi, BeagleBone, or other microcontroller. This can be useful for timing lights to music.
The mono version has the left and right channels fed into the onboard MSGEQ7 integrated circuit. This gives a good representation of what is heard by your ears. The stereo version analyzes both channels separately using two onboard integrated circuits. The board measures 1.3" by 1.0" (33mm by 27mm).