Description
- Pico 2 RP2350 microcontroller board with pre-soldered header, based on Raspberry Pi's own RP2350 microcontroller chip, adopts dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
- Pre-soldered Raspberry Pi Pico 2 microcontroller embedded 520KB of SRAM, and 4MB of on-board Flash memory, as well as 26 multi-function GPIO pins, 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 24 controllable PWM channels
- USB 1.1 with device and host support, low-power sleep and dormant modes, drag-and-drop programming using mass storage over USB, Temperature sensor
- Castellated module allows soldering direct to carrier boards, 12 Programmable I/O (PIO) state machines for custom peripheral support
- For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, complete online development resources and tutorials to help you get started easily. Feel free to contact us for more information
Overview
Pre-Soldered Rasp Pi Pico 2 with header pin is a low-cost, high-performance microcontroller board with flexible digital interfaces. Based on Raspberry Pi's own RP2350 microcontroller chip, with unique dual-core and dual-architecture design, running up to 150 MHz, embedded 520KB of SRAM and 4MB of on-board Flash memory, as well as 26x multi-function GPIO pins.
For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available. There're also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly.
Key features
--RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom
--Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
--520KB of SRAM, and 4MB of on-board Flash memory
--Castellated module allows soldering direct to carrier boards
--USB 1.1 with device and host support
--Low-power sleep and dormant modes
--Drag-and-drop programming using mass storage over USB
--26 multi-function GPIO pins
--2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 24 controllable PWM channels
--Temperature sensor
--12 Programmable I/O (PIO) state machines for custom peripheral support
Package Content
--Pico 2 with pre-soldered header x1
--1*3PIN yellow pin header x1
--USB-A to micro USB cable ~1.2m x1