Description
- The dark grey projection film is a new generation of display equipment with high definition, high light resistance, ultra-thin and anti-aging advantages. Molecular-grade nano-optical components: holographic color filter crystals (HCFC) as the core material, fusion nanotechnology, materials science, optics, polymers and other multidisciplinary results and preparation processing technology, with organic materials, inorganic nano-powders and Fine metal powder is produced from raw materials.
- HIGH DEFINITION - The holographic projection film has unique high-definition and transparent imaging characteristics. At the first time, it captures the curiosity and attention of the audience, and the high-quality transmission of visual information will not obstruct the display of field exhibits. Moreover, it is not subject to the limitation of the site and design, or suspended half empty, or full of walls
- SELF ADHESIVE - This self adhesive rear projection film is of glue design, the adhesive strength is not strong, so please do not worry to leave residue after removing. And it is very sticky as long as it is sprinkled with water on the glue side and surface. There is no chemical release, very easy to install, just make sure the surface is completely clean and absolutely free of any blemishes
- WIDE APPLICATION - Rear Projection Film can be sed to any smooth surface, such as glass, acrylic, window display. Suitable for Dynamic image display. Mainly applicable to the event promotion display, Conference presentation, glass window advertising, Wedding Banquet Event Display, Teaching video playback, shopping malls advertising carriers, airport, subway, railway station advertising carriers, etc
- SATISFACTION GUARANTEE - The product does not work or fails on delivery, please do not hesitate to contact us, you will have our full attention
Specifications:
Material: PET
VLT - 54%
Color: Transparent(with a little grey), Translucent White, Grey, Dark Grey, Black
Features: Self-adhesive, non-toxic, environmentally friendly, low ambient light, high contrast, wide viewing angle, color without bias, clear image effect
Installation Steps:
1. Trim films to the size you want
2. Keep the window or glass clean and spray much soapy water
3. Peel off the protective film (use 2 pieces of tape to apply to both sides of the corners and pull it apart)
4. Wet the adhesive side with much soapy water
5. Set up film on glass
6. Squeegee away water and air bubbles
7. Dry the glass with a towel
Quick tip:
1. In order to easily remove the protect backing film, simply use 2 pieces of tape to apply to both sides of the corners and pull.Please spray a lot of water before installation.
Its better to watch the installation video of glass film on YouTube before installation.