Description
With the ScanPower Director remote you can easily & quickly scan among all your cameras (up to 16) with the touch of one button! A smart microprocessor makes it a revolution in scanning between wireless cameras. Get three and control your cameras from every TV in your home! Controls up to 16 cameras Automatically turns proper camera off/on Battery operated, RF transmission, 100' range. If you have more than four X10 cameras in your surveillance system, then you know that scanning between cameras is a little tricky. You have to manually turn off one camera, then turn on the next camera. It wasn't as easy to scan 4 cameras as 8 cameras! Now you can get a NEW smart solution to multi-camera scanning! Now you can push one button and scan among all the cameras in your system, whether you have 4 or 16! Its the answer you've been looking for! How it works: The default setting for the remote is to control 1 group of four cameras. To set it to scan through more than four cameras, the customer has to configure the number of cameras. This is easy to do: First, slide the switch at the bottom of the remote to "Program" (See photo on left.) and hold down the button corresponding to the total number of cameras (if 6 cameras, button 6) (the LED will blink to indicate that the change is made) then slide the switch back to "Normal" while still holding down the button. Now the scan button will work for all the cameras configured. .Because the 4 camera groups built into the addressable power supplies (XM10A) remain unchanged, the ScanPower Director sends off commands to accomplish the scanning function. This means that when changing cameras outside of one of the camera groups (group 1: Cameras 1-4; Group 2: Cameras 5-8, etc.), it will take a couple seconds for the ScanPower Director to send all the necessary commands.